Televic Confidea CD G3, Описание системы

Страница: 5 / 30

3
Saf
ety I
nstructions and c
onformit
y info
5
3 Safety Instructions and conformity
info
The Confidea Wireless Conference system is state of the art and has been designed to meet
quality. Nevertheless, the individual components of the conference system can cause danger for
persons and material assets if
- The conference system is not used as intended,
- The conference system is set up by personnel not familiar with the safety regulations,
- The conference system is converted or altered incorrectly,
- The safety instructions are not observed.
3.1 FCC and ICES information
(U.S.A and Canadian Models only)
3.1.1 Statements for FCC and Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The Confidea wireless equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Wireless discussion units and the Wireless Access Point comply with Part 15 of the FCC
Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: