Televes MUX DVBS2-COFDM CI, Руководство пользователя

Страница: 23 / 36

EN
23
service, followed by the service name.
And finally, in the bottom line of the screen, is
shown the corresponding number with the original
service_id and the service_id value at the output.
Note: The user must avoid setting the same service_
id for different services.
When the unit detects that the service_id value
shown is either assigned to more than one service
or is the “0” value, it displays an exclamation mark
(
!
) to the right of the value to indicate the user to
assign a different value.
5.2.i LCN type menu
Not all receivers interpret in the same way the
information provided by LCN (Logical Channel
Number).
Some countries use some variation on the standard
to be applied for this setting to work properly.
Available choices are: Generic, UK and Nordig
name.
Finally, on the last line is displayed the channel
number (LCN) assigned.
Note: The user must avoid setting the same LCN for
different services.
When the unit detects that the LCN value shown
is assigned to more than one service, it displays
an exclamation mark (!) to the right of the value to
indicate the user to assign a different value.
5.2.h Service_ids remapping menu
This menu allows configuring the output service_id
value for each one of the services configured to
ON/DCY.
Using this option you can change a service by
another previously OFF, and keep the same
service_id , allowing a large number of receivers
automatically detect the change without having
the need to re-scan.
On the upper of the display is displayed
the index (order) of the current service and
the total number of them at the output.
Then is shown the input from which comes the
check versions or rights of the card.
Should not be connected any conditional access
module (CAM), then it will be displayed the
message “CAM unavailable”.
5.2.g LCN menu
This menu lets you assign a LCN ( Logical Channel
Number ) to the services that are present at the
output of the multiplexer.
This function allows an automatic ordering
of services, in those receivers ready for it.
If selected “0 “ as channel number, it means that no
number is assigned to this service, and therefore it
will be displayed: NO LCN.
On the upper of the display is displayed the index
(order) of the current service and the total number
of them at the output. Next is shown the service