background image

HDTV TRANSMODULATOR - Dual 8PSK to QAM

46

A. 

Televés  warrants,  only  to  the  original  Purchaser,  all  Products  be  free  from  any 

defect in materials or workmanship for a period of two (2) years from the date of 

original purchase, unless otherwise specified.

B. 

Televés shall, free of charge and in its sole discretion, either repair, replace with 

a new or factory reconditioned equivalent, or refund the purchase price of the 

Product(s), that has been determined by Televés to be defective in material or 

workmanship, subject to the limits of this warranty.

C. 

This warranty excludes any damage or inoperability resulting from:

I. 

 Use  or  installation  that  is  not  in  strict  compliance  with  the  written 

instructions and specifications;

II.  Any modification or alteration performed by any third party not authorized 

in writing by Televés;

III.  Service or repair performed by any third party not authorized in writing by 

Televés;

IV.  Misuse, abuse, intentional harm, or lack of reasonable care;

V.  Fire, ice, snow, rain, wind, water, volcano, excessive heat or cold, lightning, 

flood, power surge, earthquake, or any other acts of God;

VI.  War, crime, strike, riot, electro-magnetic pulse, or any other acts beyond the 

control of Televés;

VII.  Shipping.

D. 

All  claims  under  the  terms  of  this  warranty  must  be  made  in  writing,  by  the 

original Purchaser, within fourteen (14) days of the defect being known to the 

Purchaser.  Such  claims  shall  be  accompanied  by  a  description  of  any  material 

facts  related  to  the  claimed  defect  and  the  invoice  or  other  proof  of  original 

purchase date and price. If Televés so requests, the Purchaser shall, at Purchaser’s 

expense,  deliver  the  claimed  Product(s)  to Televés,  within  14  days  of  the  date 

of  the  return  authorization.  Under  no  circumstances  shall  the  Product(s)  be 

returned to Televés without a return authorization.

E. 

Any  refund  to  the  Purchaser,  shall  be  limited  to  the  purchase  price  of  the 

Product(s), excluding any applicable taxes, duties, freight costs, removal costs, 

installation costs, or any other charges incident to the purchase of the product.

F. 

Any damage caused by shipper shall be claimed with the shipper in accordance 

with the shipper’s policies and procedures. 

G. 

Televés shall in no event and under no circumstances be liable or responsible 

for  any  consequential,  indirect,  incidental,  punitive,  direct  or  special 

damages based upon breach of warranty, breach of contract, negligence, 

strict tort liability or otherwise or any other legal theory, arising directly or 

indirectly from the sale, use, installation or failure of any product acquired 

by Purchaser from Televés.

H. 

This limited warranty extends to the original Purchaser and cannot be assigned 

or transferred to any other party without the prior express written permission of 

Televés, which permission Televés may withhold for any reason or for no reason 

at all.

I. 

Televés will not assume any liabilities for any other warranties, whether statutory, 

express or implied, made by any other person.

J. 

Televés reserves the right to modify or discontinue this warranty at Televés’ 

sole discretion without notification. No other warrantees are expressed or 

implied.

Televés Extended Five (5) Year Warranty

K. 

Any product in the T.0X family is subject to a five (5) year warranty from the date 

of original purchase. This three (3) year extension applies only to new Product(s) 

in its initial installation and only extends the duration of the warranty beyond the 

original duration subject to the addition of the following terms:

Televes Limited Warranty

Содержание HDTV TRANSMODULATOR - Dual 8PSK to QAM

















































Отзывы: