1511214
RF Modulator
OWNER’S MANUAL — Please read before
using this equipment.
Your Nexxtech RF modulator is designed to
convert the separate audio and video signals
from a DVD player, video camera, computer,
portable VCR or satellite receiver into VHF TV
signals that you can view on a TV set that has
no A/V (audio/video) inputs.
This means you can use it to connect a DVD player to an older TV’s
antenna/cable input. The RF modulator’s gold-plated jacks and
terminals assure maximum reliability and minimum signal loss.
Your modulator might cause TV or radio interference even when it is
operating properly. To determine whether your modulator is
causing the interference, turn it OFF. If the interference goes away,
your modulator is causing it.
Try to eliminate the interference by:
• Moving your RF modulator away from the receiver
• Connecting your RF modulator to an outlet that is on a different
electrical circuit from the receiver
• Contacting your local electronic store for help
If you cannot eliminate the interference, you may be required to stop
using your RF modulator. Changes or modifications not expressly
approved by Nexxtech will void the warranty of this equipment.
REQUIRED PARTS
The following items (available at your local The Source store) are
required to connect your RF modulator to a video input source and
your TV.
• 1 audio/video shielded cable with 3 phono connectors at each
end, if the video source’s audio output is stereo; or 1 audio/video
shielded cable with 2 phono connectors at each end if the video
source’s audio output is monaural
• Two 75ohm coaxial cables with F-type connectors
• A 75-300 ohm matching transformer, if your TV does not have a
VHF 75ohm F-connector
• 1 S-Video cable, if the video source has a S-Video jack
Note: The audio output from the RF modulator is always mono,
even if the source audio is stereo.
CONNECTIONS
The diagram illustrates typical configurations for video source
conversion.
• If your video source is stereo, plug the connectors on one end
of a stereo A/V cable into the video and audio input jacks on the
RF modulator. Plug the connectors on the cable’s other end into
the video and audio output jacks on the video source, using the
colour coding on the connectors as a guide
• If your video source is monaural, plug the connectors on one end
of an A/V cable into the video and audio input jacks on the RF
modulator (using either the AUDIO R or L jack). Plug the cable’s
other ends into the video and audio jacks on the video source
• If your video source has a S-Video jack, use a S-Video cable to
connect the S-Video jacks on the RF modulator and the video
source
Note: The RF modulator selects S-Video as the first priority if
both VIDEO and S-VIDEO jacks are connected.
Connect 75ohm coaxial cables to the RF modulator following
these guidelines:
• If your TV is already connected to another VHF input source
(such as cable, an antenna or a VCR, for example), disconnect
the VHF input source’s 75ohm cable from the TV’s 75ohm VHF/
UHF terminal, and reconnect it to the RF modulator’s ANT IN
terminal. Then connect a 75ohm coaxial cable between the
TO TV terminal on the RF modulator and the 75ohm VHF/UHF
terminal on your TV
• If your TV is not already connected to another VHF source,
connect a 75ohm coaxial cable between the TO TV terminal on
the RF modulator and the 75ohm VHF/UHF terminal on your TV
• If your TV has only 300ohm VHF screw terminals, use a 75-300
ohm matching transformer to complete the connection
• When your connections are complete, plug the RF modulator’s
power cord into a standard AC outlet
OPERATION
1. Turn ON the TV and set it to either channel 3 or 4, whichever is
not used for regular broadcasts in your area
2. Set the RF Modulator’s channel 3/4 switch to the same channel
you set the TV (3 or 4)
Note: To watch a TV broadcast, turn OFF all other video
sources.
CARE
Keep the RF modulator dry; if it gets wet, wipe it dry immediately.
Use and store the RF modulator only in normal temperature
environments. Handle the RF modulator carefully; do not drop it.
Keep the RF modulator away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
Modifying or tampering with the RF modulator’s internal
components can cause a malfunction and might invalidate its
warranty. If your RF modulator is not performing as it should, take it
to your local The Source store for assistance.
SPECIFICATIONS
Video Carrier Output Level. . . . . . . . . . . . . . . . . . . . . . . . . . 69 dB V
RF Output Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 or 4
RF Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Ω
Audio Input Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3 k Ω
TV to ANT Insertion Loss . . . . . . . . . . . . . . . . . 50 – 806 MHz –2 dB
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 × 78 × 37 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.38 kg
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without
notice.
Adding one video source to the signal:
VIDEO RF MODULATOR
STANDARD
TV ANTENNA
TV REAR VIEW
DVD REAR VIEW
CABLE BOX
S-VIDEO
VIDEO/
AUDIO
CABLE
OR
