background image

DVBS2 - COFDM

16

that occupies the service indicated. The second 
number indicates the percentage of the output 
that is free. In the example, France 2 will occupy 
18% of the output (it is OFF so it is removed) and 
there is 25% of free space. It is easy to see that, 
in principle, this service could be activated (ON 
or DCY) because there is still suffi

  cient  capacity 

to output. The free percentage to output is only 
updated once the confi guration of the services has 
been recorded.

Additionally, the status (scrambled or clear) of the 
service, both at the input and output are indicated 
in the upper right hand corner:

                 Scrambled service at input.

f. Measurements menu 1

The following menu provides an indication of the 
input 

signal quality

 using an estimate of C/N (dB) 

and the link margin (dB).

MONITOR >>

C/N:14.1dB

L.M.: 7.7dB

g. Measurements menu 2

This menu indicates the 

occupancy rate

 of the 

module’s output as well as the maximum achieved. 
If too many services are selected it will result in an 
output overfl ow and this condition is indicated. 

MONITOR

Occupancy:

76%

Max:80%

   

MONITOR

Overflow!!

Occupancy values higher than 82% are not 
recommended. 
If the occupation exceeds 82%, we recommend 
trying to reduce it, either by changing the guard 
interval, the modulation or the FEC.
If despite this, the modulation is still over 82%, the 
only option to reduce it would be to eliminate a 
service of the output multiplex. See paragraph 6.
This is a read only menu, which disables the keys 

 and  . 

You can reset the maximum occupation by 
pressing the key   .

5.2. Extended menu

When the   key is held down for more than 3 
seconds the unit shows a series of less frequently 
used menus called 

extended menus

.

a. Confi guration menu

This menu enables the 

address

 of the unit to be 

selected (to be controlled through a CDC Headend 
Control).
It also allows selection of the 

output frequency 

diff erence

 (125 or 166KHz), the 

table of channels 

to use or 

frequency mode

 operation. 

CONFIG.

CDC Adr:  001

Step:  166KHz

CCIR N.Z.Ind

The channel tables that can be selected are:
 • 

CCIR,

 • 

China

 • 

Chile

 • 

Italy

 • 

France

 

• OIR channels

 • 

Ireland

 

• South Africa

 • 

Poland

 • 

Australia

Содержание DVB-S2 COFDM

































Отзывы: