CoaxManager
™
User Guide
28
Network Mitigation
Normally in a network of one master and several slaves they transmit at maximum power in order to
ensure greater coverage and throughput. It is possible that in a coaxial network are installed two different
networks, with two masters and their slaves are poorly insulated from each other or the insulation
provided by the network is not sufficient and interference occurs between adjacent networks
When several masters coming together or poorly insulated and we form two different networks have the
option to control the transmission power and reception sensitivity of the devices on a network to mitigate
the effect these have on a network transmissions next and viceversa . This is done by detecting certain
packages from nearby networks.
The mitigation Network provides an alternative to the diplexer filter installation for the isolation of data
networks. We recommend installation of those filters diplexers so as to isolate the different networks in
the coaxial data, see the product manual for more information.
If it is not possible to isolate the networks with filters diplexers, Mitigation Network option allow masters
from each of the networks controlling the transmission power of all the elements in order to mitigate the
effects that their transmissions have a close network . In the event that this option is not activated, the
transmissions of other nearby networks are regarded as transmit interference causing a decrease in the
transfer rate between the devices.
Do not use this option in case your installation scheme consists of the installation of multiple masters on
the same coaxial distribution (multiple AVLN) and not on separate segments (multiple dwellings)
E
N
G
L
IS
H
