EN
1
2
3
4
5 6
7
8
ARANTIA
TRANSCODER/STREAMER LIVE
Powered by
1
6
3
5
2
4
7
1
2
3
4
5 6
7
8
ARANTIA
TRANSCODER/STREAMER LIVE
Powered by
1
6
3
5
2
4
7
Description
Front panel view
Rear panel view
1
.- Error
2
.- Network status 2
3
.- Network status 1
4
.- Hard disk access
5
.- Power status
6
.- Reset
7
.- ON / OFF
1
.- Mains power
2
.- PS2 mouse
3
.- PS2 keyboard
4
.- IPMI
5
.- 2 USB sockets
6
.- Serial port
7
.- VGA
8
.- 4 Ethernet Gigabit (RJ45)
General installation conditions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Warning
Reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as glasses, shall be placed on the
apparatus.
Safe operation
Power requirements for this product are: 100-240V~ 50/60Hz.
Should any liquid or object fall into the equipment, please refer to
qualified personnel for service.
To disconnect the equipment from the mains pull the plug never the
cable.
It is strongly recommended not to connect the equipment to the
mains until all connections have been done.
The socket outlet shall be installed near the equipment and shall be
easily accessible.
Do not take the cover off the equipment without disconnecting it
from the mains.
Safe installation
Ambient temperature should not be higher than 113°F.
Do not place the equipment near heat sources or in a highly humid
environment.
Do not place the equipment in a place where it can suffer vibrations
or shocks.
Please allow air circulation around the equipment.
Do not place naked flames, such as lighted candles on or near the
product.
Important safety instructions
