Televes 769301, Руководство пользователя

Страница: 10 / 46

Data Over Coax Gateway Ref.769301
10
WPS Button
WPS (Wireless protected setup) allows the easy configuration of a wireless secure connection with other
devices supporting the WPS protocol. Siply push the button and activate the WPS function on the wireless
device.
The WPS function will be active for 2 minutes, during this period of time the client should stablish a secure
connection.
While the WPS mode is active the power LED will blink orange, once the connection has been finalised the
WPS mode will stop and should a connection to a different device be needed the WPS button should be
pressed again.
WiFi switch
WiFi Switch allows three positions and hence WiFi status:

OFF (left ): radio is off, LED will bright red indicating that device has been turned off WiFi.

Low Power (Center): WiFi radio will be on in low power mode. This mode will reduce exposure to
radiation and interference in nearby networks. The maximum radiated power will not exceed
3dBm. In this mode the WiFi LED will bright orange.

Normal (Right): WiFi radio will be on in normal mode. The maximum radiated power will be of 17
dBm In this mode the WiFi LED will bright green.
www.televes.es
E
N
G
L
IS
H