Televes 716701, Быстрое руководство

Страница: 6 / 20

6
HDMI TRANSMITTER & RECEIVER
3. System Installation
1. Use HDMI cable to connect the HDMI IN of the
Transmitter to a Source device. If you want to watch the
source program on the same time, you can use another
HDMI cable connected the HDMI OUT to display (HDTV).
A/V Sources: Satellite receiver, CATV STB, BD player,
PS4, XBox...
2. Use HDMI cable to connect the HDMI OUT of the
Receiver to a display device.
A/V Displays: HDTV, Projector.
3. Connect the IR emitter to the Transmitter. And then
place the emitter probe in front of the source device’s
IR receiver.
Connect the IR receiver to the Receiver. And then place
the receiver probe in front. (If you do not need the IR
extending function, please skip step 3).
4. Connect a DC5V/1A power adaptor to the Power Jack
(Micro USB type) of the Transmitter.
5. Connect another DC5V/1A power adaptor to the Power
Jack (Micro USB type) of the Receiver.
6. Connection completed & ready to use.
If no video signal on your display, please pairing the TX and
RX fi rst. (Press the MODE key of RX box and then press the
MODE key of TX box).
4. Operations
TX & RX Pairing MODE
1. First Press “MODE” key once on the Receiver BOX.
2. You will see message “Connecting through Pairing…” on
screen.
3. And then Press “MODE” key once on the Transmitter
BOX.
4. Connection will be auto-established after successfully
paired.
LED Indication
There are LEDs and UI for indication of System operation,
for more detail please check the table bellowed.
IR Extending Function
1.- Make sure the IR Emitter Probe has been installed
properly on the Transmitter.
2.- Make sure the IR Receiver Probe has been installed
properly on the Receiver.
3.- Use the remote controller of your source device to
control the source through the Receiver.
Specifi cations
HDMI HDMI High Speed
Resolution HD 1080p/60Hz
Frequency Range WiFi 5GHz band
Channel Bandwidth MHz 20 or 40
RF output power dBm 10 ±1
Security
HDCP 2.0 based
encryption
Distance m
Up to 100ft (30m)- -(line
of sight) / no walls
Latency seg < 0.5
Antenna Type Dual PCB antennas
Data Rate
Video Gbps ≤3
Audio Mbps ≤18
Supply Voltage
V 5
A 1
IR carrier KHz 30 ~ 60
Dimension mm 14x85x85
5. System Structure
Condition TX RX RX UI (TV Screen)
Star up
(Power On) LED solid
RED
LED solid
RED
Star up Image
Mode
(Press Button) RED LED
fl ashing
LED solid
Blue
Connection
through pairing
No
Connection Blue LED
fl ashing
LED solid
Blue
Scanning
Connection
& Play LED solid
Blue
LED solid
Blue
Video
TV
HDMI OUT
POWER ADAPTOR
HDMI IN
POWER
ADAPTOR
HDMI
OUT
TV