Televes 593301, Инструкция по эксплуатации

Страница: 19 / 29

EN
19
18
10. Setup
Change main configuration settings:
- Band : Terr, Sat
- Ter. Network:
Aerial, Cable
-
Terr Plan
: FCC STD, FCC RETURN, FCC IRC,
FCC HRC, FCC OFFAIR, CCIR, and customers
plans
- Sat Plan : F68E INTEL C, 68E INTEL, 42E TURK,
39E HELLAS, 33E EUTEL, 28E EUTEL, 28E
ASTRA, 26E BADR, 25E EUTEL, 23E ASTRA, 21E
EUTEL, 19E ASTRA, 16E EUTEL, 13E HOTB, 10E
EUTEL C, 10 EUTEL, 9E EUTEL, 7E EUTEL, 4E
ASTRA, 1W THOR5, 1W THOR6, 5W EUTELC,
5W EUTEL, 7W NILE, 30W HISPA, 48W AMZC,
48W AMAZ, SIM, and customers plans
- Sat. Freq.: IF, real Freq.
-Sat. LNB: Universal, C Band, Other.
If Other is selected, you must enter the
frequency.
-
Language
: English, Español.
- Units : dBµV, dBmV, dBm
- Quality profiles : Trunk, Tap, End Line,
Ground.
Different thresholds are available for different
testing locations.
- Analog Standard: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier: 4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
-Volume
-
Time and Date
:
Set current time (hour and minutes) and
date (day of the month, month and year).
- Energy:
Auto suspension
Auto shutdown
- USB Storage (only old hw version):
Connect
your H30FLEX to your computer using the USB
connector and turn USB Storage ON, so you
can use your H30FLEX as a storage unit.
- Update firmware:
See section Firmware
update
- Reset configuration:
Resets the
H30FLEX
to
factory settings
- Licenses: Shows a list with all the licenses
included in your H30FLEX
- About SW
- About HW
Driver Installation (
only for old
hardware version with USB connector
)
1. Connect your H30FLEX to your computer using
the USB
2.- Depending on your Windows versión and con-
figuration, it may happen that your computer in-
stalls automatically the corresponding driver.
3.- If it does not occur, you must follow the next
steps:
3.1.- Open the Control panel
3.2.- Select Device Manager