Encoder/Modulator HD DVB-T / DVB-C
Ref. 585401
Art. Nr. HQAC
Input
Output
Power
HD Digital Encoder/Modulator
USB IN
FW UPDATE
RF OUT
RF IN
OFF/ON
Ref. 585401 Art. Nr. HQAC
HDMI
Fuse:
T 2A L 250V
Power
DC-In 12V
Imax = 1,1A
585401
RF
IN
RF
OUT
HDMI
IN
Power
USB
CAMERA
CCTV
DVD
IRD SAT
TS FILES
HDMI
Application
Description of connections and indicators
For wall assembly: Support
ref. 640301
Assembly accessory
Safety instructions
General installation terms and conditions
1. Read the instructions.
2. Keep these instructions.
3. Pay attention to all warnings.
4. Follow all instructions.
5. Do not use this appliance close to water.
6. Clean with a dry cloth only.
7. Do not block vents. Install according to the manufacturer’s
instructions.
8. Do not install close to sources of heat such as radiators, heat
registers, heaters and other heat-producing appliances (including
amplifiers).
9. Only use attachments/accessories specified by the manufacturer.
10. Request all repairs from qualified service personnel. Request a
repair when the appliance is damaged in any way, such as damage
to the mains cord or plug; liquid spills or if any object has fallen
inside the appliance; or if the appliance has been exposed to rain
or moisture, does not work properly or has fallen.
Warning
The device should not be dropped or splashed by water. Do not
place objects or containers filled with water, such as vases, over or
close to the appliance.
How to use the equipment safely
Should any liquid or object fall inside the appliance you should
contact the technical service.
Safe installation
Room temperature must not exceed 30°C.
Do not place the equipment close to sources of heat or in
environment with high humidity levels.
Do not place the equipment where it can be subject to strong
vibrations or jolts.
Leave a free space around the appliance for proper ventilation.
Do not place sources of naked flames, such as lit candles, over the
appliance.
Symbols
Designed for indoor use.
Meets EC marking requirements.
This product cannot be treated as normal domestic waste.
It must be taken to a waste electrical and electronic
equipment collection point (WEEE).
Description
Encoder designed for viewing a channel from an HDMI source
on all household TVs without having to add an STB port (for
example) to each.
This encoder can add a channel from an HDMI video source
to TV distribution. To do this, connect the TV antenna output
to the encoder loop RF input. The RF output obtains the input
content plus an additional RF channel with HDMI content.
Features
COFDM/QAM A modulation.
Configured via wifi web browser using a PC/laptop or mobile
device (tablet, smartphone ...).
Software can be updated through USB port.
“video.ts” file created with TScreator (www.televes.com)
played on loop via USB.
Loop input to combine with other RF content (loop through).
Content of packaging
1 - HDMI modulator
1 - Power source (12V 1.5A)
1 - USB memory
1 - Technical specifications
Power con-
nector
12V
(included)
RF input
(loop)
RF output
HDMI
input
WiFi button
(configuration only,
turns off after 30
min. inactive)
Status indicator
USB
(FW update and video play)
What to do in case of...?
-
Overheating
: temporarily disconnect equipment or install in a location with better ventilation.
-
Input disconnected
: Check the connection and video source resolution.
-
Output overflow
: Adjust modulator output parameters. If the problem persists, adjust input parameters to reduce bit rate.
LED
(Green)
(Orange)
(Red)
(Flashing)
Power
Operation OK
High temperature Overheating
WIFI activated
Input
Input connected
Input disconnected
*See section: Updating equipment
Output
Operation OK
Output overflow
*See section: Updating equipment
EN
