3
EN
Important safety instructions
General installation conditions:
• Before handling or connecting the equipment,
please read this manual.
•
Do not obstruct the equipment’s ventilation
system.
• Please allow air circulation around the equipment.
• Do not place the equipment near sources of heat
or in excessively moisture conditions.
• Do not place the equipment where it may be aff
ected by strong vibrations or knocks.
How to use the equipment safely:
• If any liquid or object falls inside the equipment,
please contact a specialized technician.
• Do not connect the equipment to the mains until
all the other connections have been made.
Instructions for the optical
connection:
• For the optical connection, a single mode fi bre
cable is used with an SC/APC-type connector.
•
Remove the protective cover from the optical
connector on the front panel of the device, and
the cap on the connector of the single fi bre cable.
• Connect the cable to the device, carefully slotting
the guides together for both connectors, pushing
the connector all the way in.
Precautionary measures with the
connection point:
•
Take special care to avoid damaging the
unprotected ends of the connectors, as small
scratches, impurities and/or particles of dirt, oil,
grease, sweat etc. may signifi cantly aff ect the
quality of the signal.
• To clean the ends of the connectors, gently rub
with a lint-free lens cleaning cloth, dampened
using additive-free isopropyl alcohol. Make sure
the alcohol evaporates fully before connecting.
• Keep the connector covers and cable caps in a
safe place in case they are needed in the future.
• Always fi t the covers on the connectors of devices
that are not connected to cables to prevent the
laser beam from damaging the eyes.
• Avoid turning on the transmitter without having
the fi bre optic cable connected.
Safety measures
Warning.-
This product emits an invisible laser beam.
Avoid contact with laser radiation. The use of
equipment such as binoculars or
magnifying glasses may increase damage caused
to the eyes.
LASER APERTURE
Invisible laser radiation.
Do not watch directly with
optical instruments.
Class 1M laser product.
Accord to EN60825-1_ 2007
Caution!
- The use of controls or adjustments or any other
procedures other than those specifi ed in this
manual may lead to exposure to harmful radiation.
- Carefully read and observe the instructions given
in this manual, and keep it for future reference.
- Do not use the equipment in any way that does
not comply with the operating instructions or
in any conditions that exceed the stipulated
atmospheric specifi cations.
-
This equipment is not user-serviceable. Should
you require assistance, contact our technical
service department.
- Never point the laser beam intentionally at people
or animals.
