User´s Manual
Audio/Video Transmitter & Receiver
70
1.-
Make sure the transmitter ON/OFF switch is in the OFF position.
2.-
Use the supplied leads to connect the A/V transmitter inputs to the outputs of the
rest of the units sending signals. Please be sure of matching colour connections.
3.-
Select the transmission channel on the back of the transmitter (see section
"Selection of channel and sampling time").
4.-
Plug one end of the provided power adapted into the back of the transmitter and the
other end into any 230V~ wall outlet. Turn the ON/OFF switch to ON position. The
LED that corresponds to the previously selected channel will light up.
5.-
Next examples show how to connect up the transmitter. Some of them might need
additional accessories.
LINE
IN
LINE
OUT1
LINE
OUT2
RF IN
RF OUT
RF IN
VIDEO 1 VIDEO 2
IN
To wall
outlet
230V~
A/V Cable
Coaxial cable
(must be purchased)
Recommended TV
connection for
dual-output VCR
Cable TV hookup.
Signal from antenna
TRANSMITTER
VCR
TV
Connecting the Transmitter
How to transmit signals from any equipment (transmitter)
From a VCR
