Teletype WorldNav 5300, Руководство по оборудованию

Страница: 14 / 20

27
Main Menu
Press the target and follow it around the screen to calibrate.
3.5 FM Transmitter
The FM feature enables you to link your device
to an unused radio frequency channel, thereby
allowing you to hear your route instructions over
the radio speakers which means you can turn the
volume up very high on the radio in case your truck
is noisy. Select a frequency from the FM menu and
then set your radio dial to that frequency.
Set the desired FM frequency on the GPS. Set the
same frequency on the FM radio of your vehicle.
Example: Set the GPS to 76.0 and the vehicle radio
to 76.0. The function is intended for use while you
are not playing music. However, in some cases
depending upon the strength of the FM signal the
GPS instructions will play over a muted sound of the
music. Be sure to keep the GPS powered with the
proper cord as the FM function will not work when
strictly on battery power.
Hardware User Guide
28
Turn On FM to hear voice instructions through your FM Radio.
FM transmitter is to transmit the audio signal into
receiving device, Take FM 90.0mhz for example, now
the navigation frequency is same as receiving
frequency, is 90.0MHZ, now the two devices are in
same frequency band, which make the navigation
can output the sound.
NOTE - When FM is turned on you will not hear any
sound from the GPS. Be sure to turn off the FM option if
you want to resume hearing sound directly from the
GPS.