Teletype WorldNav 3100, Руководство пользователя

Страница: 10 / 30

WorldNav 3100 10
© 2007 TeleType Co.
1.5 Quick Start Method
1. Plug in the WorldNav 3100 to the 12v car power lighter in your vehicle. In order to charge the unit while
driving, plug the power cord into the hole on the bottom right side of the GPS. The GPS will charge when
your car is on. If the WorldNav does not turn on immediately, press the Reset button located on the back of
the GPS. The reset button will not erase any of your saved history or points.
2. Your WorldNav includes a pre-configured Secure Digital card with maps and points of interest pre-installed.
The card has already been inserted into the GPS. Removing the card will result in the GPS becoming
non-operational. If in addition you have purchased an expansion SD Card, to insert your Secure Digital Card
in the side of the GPS, make sure the metal connection points on the card match with those visible inside
the device. To remove the card press down on the card, it will pop up and you can then remove the card
from the slot.
Secure Digital Card
3. Attach your GPS system to the windshield by putting the suction cup on the window (moisten cup if
necessary) and then by using the flip button next to the suction cup to achieve suction. Rest the
GPS on the dash to help stabilize it against vibration.
4. Flip the built-in receiver up and pointed towards your windshield. The WorldNav 3100 will
automatically lock into your GPS position; there is no configuration required. The GPS will know
your direction of travel only once you begin to move.
Mounted WorldNav 3100
5. From the Main Menu Screen select <Navigation>.
Device Main Menu Screen
6. Press the <I Agree> button to start using the GPS Device.