Refresh
Click the
Refresh
button to re-scan site survey on
the screen.
Connect
Click the
Connect
button to establish connection.
LAN Interface Setup
This page is used to configure the parameters for local area network that connects to the
LAN ports of your WLAN Broadband Router. Here you may change the setting for IP
address, subnet mask, DHCP, etc.
Item
Description
IP Address
Fill in the IP address of LAN interfaces of this
WLAN Access Point.
Subnet Mask
Fill in the subnet mask of LAN interfaces of this
WLAN Access Point.
Default Gateway
Fill in the default gateway for LAN interfaces out
going data packets.
DHCP
Click to select
Disabled
,
Client
or
Server
in
different operation mode of wireless Access Point.
DHCP Client Range Fill in the start IP address and end IP address to
allocate a range of IP addresses; client with DHCP
function set will be assigned an IP address from
the range.
Show Client
Click to open the
Active DHCP Client Table
window that shows the active clients with their
