8
5.1. Login Information
After properly connecting and powering the unit, wait for the unit to finish the boot-up process.
On the computer connected to the EZPlatform™ via Ethernet, open a browser and point it to the
IP address of the EZPlatform™ (192.168.1.124 by default), as shown in Figure 3.
Figure 3.
Entering the EZPlatform™ IP address in the address bar
The IP address of the EZPlatform™ can be changed once you have logged in. In order to
access the web interface, the computer needs to be configured for the subnet to which the
EZPlatform™ belongs. By default, both HTTP and HTTPS are enabled, so you can log in using
the ‘http://’ or ‘https://’ headers, respectively. HTTP and HTTPS access can be enabled or
disabled independently after you have logged in.
To log in to the web interface, enter the user name and password in the prompt that appears, as
shown in Figure 4.
Figure 4.
User name and password
The default user name is ‘admin’ and the default password is ‘admin’. The password can be
changed once you have logged in. After logging in, you will see the page shown in Figure 5.