TELETRAC NAVMAN Qtanium 400, Руководство по установке

Страница: 6 / 27

Qtanium 400 | Installation Manual
6
2
Hardware
The box contains:

1 Qtanium 400

4 mounting magnets

Qtanium 400 Quick Install Card
2.1
Other Components Required
You also need the following components before starting the installation:

a power cable (see the following section for options)

a cellular antenna

a GPS antenna

WIFI antenna (with WIFI option)
You may also need any or all of the following components, depending on your installation:

I/O cable(s) to connect digital or other types of auxiliary devices and sensors
2.2
Power Cable Options
There are two choices of power cable:

3 m (9.8 ft.) heavy duty 16-gauge wire, plastic armored sheath with choke

6 m (19.6 ft.) heavy duty 16-gauge wire, plastic armored sheath with choke
2.3
I/O Cables for (Optional) Additional Connections
There are three choices of ruggedized cable for optional additional connections:

7-Way cable (SAP Code 10001345) for digital sensors or devices I/O

18-Way cable (SAP Code 10001346) for auxiliary or serial devices I/O

18-Way satellite modem cable (SAP
Code 10001384) for
connection to a Quake
Satellite Modem and/or auxiliary or serial devices
Note If desired, you can mount the Qtanium 400 using high-powered magnets such as
M5 or equivalent (not supplied).
Note The power cable and two antennas are the minimal requirement for tracking
only.