Teletek electronics LCD 63VG, Руководство пользователя

Страница: 21 / 28

LCD63VG Keypad User Manual 21
If an alarm has been triggered in the system,
the messages “ Alarm in the system ” and
“
Please, enter your code to disarm
” will be
repeated every 5 seconds.
Note: Certain users may not be allowed to
disarm the system.
In the events of AC loss and low battery, the
“ AC power is lost ” or “ Battery discharged ”
messages will sound correspondigly 3 times
every 5 seconds when arming is attempted.
Stopping the Alarm
The alarm is stopped by entering a personal
code:
After a valid code has been entered, the mes-
sage “ System is disarmed ” will be repeated
twice.
Note: In the events of AC loss and low battery,
the “ AC power is lost ” or “ Battery discharged ”
messages will sound correspondigly 3 times
every 5 seconds when arming is attempted.
Ambush Code
Ambush code is a personal code that disarms
the system, but still sends alarm signal. Its
purpose to indicate that the user is forced to
disarm the system against his/her will.
The ambush code is produced from a personal
code by increasing the last number by one.
If the last number is 9, it is replaced by 0 in the
ambush code.
Example:
Personal code: 4615 → Ambush code: 4616
Personal code: 4619 → Ambush code: 4610
After a valid code has been entered, the mes-
sage “ System is disarmed ” will be repeated
twice.
Bypassing
To execute bypass operation the user is re-
quired a personal code.
Pressing a numeric key bypasses the respec-
tive zone. The zone number is surrounded by
the symbol. Pressing the same key once
again de-bypasses the zone. The symbol
is removed. Pressing confirms the selec-
tion.
Bypassing key sequence:
LCD displays:
System Trouble Review
To review troubles the user is required a per-
sonal code.
CODE
CODE
CODE