iRIS8 - Addressable Fire Alarm Panel
– Installer Programming
13
3. PROGRAMMING SYSTEM MENUS
Press in sequence SYSTEM - PROGRAMMING from Main Screen:
In general, the Programming menus of iRIS8 include
settings for zones, periphery and loop devices, types of
addressing loop devices, settings for inputs and outputs of
the panel.
The important network settings are previewed in Panel
menus.
Quick summery of the menus:
-
Quick review of the zones’ status by zone
number (item
- Settings for Devices (item
- Settings for Outputs (item
- Settings for the Panel (item
- Restore to factory default settings (item
- Save the system configuration (item
3.1. Zones
Enter ZONES menu. The settings are distributed in two separate screens.
Press MORE button to move to the next screen.
Press APPLY button to save all introduced changes.
All introduced changes must be confirmed with APPLY
button visible on the previous screen.
Press EXIT button to move back.
Fields description and available settings at ZONES menu:
Zone Number
Use the left/right buttons to change the zone number. You can also directly enter the
number using the keyboard after selecting the digit button in the middle.
Name
Active field for setting additional description/name for the selected zone number - up to 40
digits. Refer to item
for details about text introducing.
Zone Group Button
Attaching the zone to groups (item
).
Mode
Active button for setting the operation mode of the zone (item
).
Sounder Delay (T2)
Set time delay (0-540 sec.) for activation of Sounder (SND) panel output (item
).
Fire Brigade Delay (T2)
Set time delay (0-540 sec.) for activation of Fire Brigade (Fire R) panel output (item
).
Fire Protection Delay (T2)
Set time delay (0-540 sec.) for activation of Fire Protection (Fire P) panel output (item
).
Zone Status
Active button for changing operation status of the zone. Every pressing of the button
changes the operation status Enabled/Disabled.
Every disabled zone is inactive and the
panel does not follow its state.
Note: After disablement of a zone, the system status LED DISABLE will light on at the front
panel and also will be generated message for that event.
Zone Sounders
Set the operation of the sounders associated to the respective zone number (item
).
Sounder Group A
Enter a sounder group number from 1 to 127 according the system configuration.
Sounder Group B
Enter a sounder group number from 1 to 127 according the system configuration.
Sounder Group C
Enter a sounder group number from 1 to 127 according the system configuration.
