iRIS8 - Addressable Fire Alarm Panel
– Installer Programming
11
2. INSTALLER PROGRAMMING
2.1. Changing the Access Level
At Access Level 3 the Installer has full rights for entire programming of iRIS8 panel.
To enter the Installer menus, press ACCESS button from the Main Screen and introduce the code for Access Level 3
–
3333 is the default factory set combination.
Press ACCESS button to change the Access Level.
Enter code for Access Level 3 entry (3333
– by default)
and confirm with OK button.
2.2. Installer System Menus
The Installer menus in iRIS8 are separated into two general settings sections: Programming and Maintenance.
Press SYSTEM button to access Installer Menus.
- Programming menus (item
).
).
2.3. General Information for Text Introducing
The text introducing is via virtual keyboard, presenting access to different type of letters, symbols and numbers. The
virtual keyboard is shown on the screen after pressing an active text field. Up to 40 symbols, including space intervals,
can be entered for a name or other description of device, output, input, panel, etc.
After pressing an active text field in a menu, the screen displays the virtual keyboard.
Latin Letters screen keyboard.
Use the special buttons to switch to different type of letters
or symbols. After entering the text and confirming with
ENTER button you must also save the text with APPLY
button on the respective programming menu.
Press EXIT to reject the entered text and go back to
programming menu.
- Switch to Cyrillic Letters
- Switch to Latin Letters
- Switch to Special Letters
- Switch to Symbols
- Switch to Digits
- Switch between Capital and Small Letters
- Enter (confirmation) button.
- Backspace (delete) button.
