Starting CATVisor
TM
Commander
After installing the softwares launch Commander. When the
program has started the following “
Untitled Commander
”
window appears on the screen (picture 6).
Picture 6
.
Commander’s main view.
Commander is now running, but not yet communicating with
INE1x1
. Create the connection to the
INE1x1
by choosing -->
File/New or Connection/Add New commands from the pull-
down menus. The following “
Add New Connection
” window
appears on the screen (see picture 5).
Make the following settings (these are the default settings):
Type:
Serial Port
Serial Port Name:
COM1
(choose
COM
port where the
DVX021
cable is connected, e.g.
COM1
port)
Busmode:
DVX Bus
Click to continue.
Communication between Commander and
INE1x1
is
now created.
Note! You can also re-opened the saved connection by
choosing --> File/Open command from the pull-down menus.
When making a new connection for the fi rst time, you may refer
to the Commander’s User Manual
for the correct settings.
Picture 5
.
Commander’s “Add New
Connection” view.
INE1x1 Series User Manual rev001 7
