Starting CATVisor
TM
Commander
After installing the softwares launch Commander. When the
program has started the following “Untitled Commander”
window appears on the screen (picture 9).
Picture 9.
Commander’s main view.
Commander is now running, but not yet communicating with
IND2x2. Create the connection to the IND2x2 by choosing -->
File/New or Connection/Add New commands from the pull-
down menus. The following “Add New Connection” window
appears on the screen (see picture 8).
Make the following settings (these are the default settings):
Type: Serial Port
Serial Port Name: COM1 (choose COM port where the
DVX021 cable is connected, e.g. COM1 port)
Busmode: DVX Bus
Click to continue.
Communication between Commander and IND2x2 is
now created.
Note! You can also re-opened the saved connection by
choosing --> File/Open command from the pull-down menus.
When making a new connection for the fi rst time, you may refer
to the Commander’s User Manual for the correct settings.
Picture 8.
Commander’s “Add New
Connection” view.
8 IND2x2 Series User Manual rev001
