1.kbl.flt4040
Description
The first auxiliary cabinet backplane of the PX24X Hybrid IP PBX is connected to the
DFF board in the main cabinet with this 40cm long flat cable.
1.kbl.flt4085
Description
The second auxiliary cabinet backplane of the PX24X Hybrid IP PBX is connected to
the DFF board in the main cabinet with this 85cm long flat cable.
1.kbl.flt4110
Description
The third auxiliary cabinet backplane of the PX24X Hybrid IP PBX is connected to
the DFF board in the main cabinet with this 110cm long flat cable.
w.pxf.lftx001
Description
w.pxf.lftx001 license enables a Caller ID transmitter in the control and switching unit
of the PX24X Hybrid IP PBX for sending Caller ID information to the subscriber lines
(FXS`) according to the ETSI ETS 300 659-1 standard as an FSK signal burst where
the data transmission occurs during the first long silent period between two ring
patterns. Whenever it is available, a licensed transmitter may serve to any subscriber
interface in the PX24X. While inserting the Caller ID information between the first
and second ring, the Caller ID transmitter is busy for approximately 2 seconds. The
ring OFF time between the first and second ring is around 4 seconds. Consequently, a
Caller ID transmitter may serve to two call attempts simultaneously.
Note that the PX24X systems initially support two Caller ID transmitters without
requiring any licenses.
w.pxf.lfrx001
Description
w.pxf.lfrx001 license enables a caller ID receiver in the PX24X Hybrid IP PBX
system for detecting Caller ID information from foreign exchange to the analog DC
loop trunks (FXO`) according to the ETSI ETS 300 659-1 standard as an FSK signal
burst where the data transmission occurs during the first long silent period between
two ring patterns. Whenever it is available, a licensed receiver may serve to any DC
loop trunk interface in the PX24X. While detecting the Caller ID information between
the first and second ring, the Caller ID receiver is occupied approximately for five
seconds. The ring OFF time between the first and second ring is around four seconds.
Consequently, a Caller ID receiver may serve to one call at a time.
Note that the PX24X systems initially support two Caller ID receivers without
requiring any licenses.
w.pxf.lscxses
Description
The DVR (Digital Voice Recorder) hardware in the PX24X Hybrid IP PBX systems
has initially 4 channels for recording and 4 channels for playing. The number of
recording and playing channels can be increased in multiples of 8 with the license
w.pxf.lscxses. Each w.pxf.lscxses adds 8 more channels to the DVR. The license is
granted to a particular PX24X system and it is non-transferable.
28
