12. On the bottom of your TallyOne you will find 2
thumb screws. Remove them from the tally.
13. Attach the TallyOne to the tally mounting plate as shown
in the photo. Be sure that the J-Hook edge of the plate is fac-
ing the front side of the tally and is curving upward.
11. Take your reference monitor and insert the thumb
screws into the corresponding keyholes on the reference
monitor mounting plate. Slide the monitor up until it sits
flush with the ClockOne.
14. Now clip the TallyOne to the center of the top edge of
the trapezoidal hood by sliding the edge of the hood into
the J-Hook on the front of the tally mounting plate.
