TELES VoIP Box BRI Series, Справочное руководство

Страница: 80 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 80
sends a busy signal to the attached PBX. Alternative routing is
not carried out. You can also define a range of consecutive
cause values:
An exclamation point (
!
) in front of a cause value means all
cause values except the one listed. For example,
BUSY[!95]
,
means all cause values except 95 will be rejected with a busy
signal.
In the following example, all outgoing calls over controller 04
are rejected with the cause value 91 when the called party is
busy. Alternative routing is not carried out.
4.3.2 VoIP Profiles
This section includes all of the most important parameters for
communication with the VoIP peer.
Basic Parameters
Table 4.17
→
list some often used parameter. For more infor-
mation please see the Parameter manual.
BUSY[<cause>,<cause>]
Subscriber04=....BUSY[91]
Table 4.17
route.cfg
: VoIP Basic Parameters
VoIP Basic Parameters
[Voip=<name>]
Name of the routing profile. The name must begin with a letter. Choose a short and
meaningful name.
VoipDirection=<mode>
Defines the direction in which VoIP calls can be set up. Possible options:
In
,
Out
,
IO
,
None
).
VoipPeerAddress=<ip addr> or <name>
The peer’s IP address or name. Default is 0 (if it is not set, please set the parameter
VoipIpMask to 0x00000000).