TELES VoIP Box BRI Series, Справочное руководство

Страница: 70 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 70
The following features are possible:
|
Sending CDRs via e-mail
|
Sending alarm messages via e-mail
Table 4.12 pabx.cfg Mail parameters used in Example 4.12
→
Mail Parameters
MailAllowedPeers=<ip addr>
Defines IP addresses from which incoming SMTP connections will be accepted. Sepa-
rate IP addresses with a space. If a dash (-) is entered, the SMTP port (25) will be
blocked for incoming sessions. If this parameter is left empty (default), incoming con-
nections will be accepted from all IP addresses.
MailFrom=<URL>
Enter here the URL that will be sent in the e-mail’s FROM field in the following possible
formats:
MailFrom=domain to send OAD@domain (or user@domain, if no OAD available).
MailFrom=ipaddress to send OAD@ipaddress (or user@ipaddress, if no OAD avail-
able).
MailFrom=123@ to send 123@<IP address of gateway>.
MailFrom=123@teles.de to send 123@teles.de.
MailFrom=123@ipaddress to send 123@ipaddress.
MailRcpt=<domain>
In
<domain>
, enter the destination domain, the destination address and an @ sign. If
the destination address is already complete (with an @ sign),
<domain>
is not added.
MailRcptMax=<count>
Number of "RCPT TO" entries in e-mails that come from the LAN (a message is sent to
the LCR for each "RCPT TO" entry in each incoming e-mail).
MailSendRetries=<count>
Number of times an attempt is made to send an e-mail. Default 10.
SmtpServer=<ip addr>
In
<ip addr>
, enter the IP address of the destination SMTP server that is to receive the
e-mail messages.
Example 4.12 pabx.cfg Mail Parameters
[Mail]
SmtpServer=172.16.0.10
MailRcpt=teles.de
MailFrom=172.16.0.100
MailRcvMax=300
MailRcptMax=50
MaxMailsToHost=2
MailToHostRetries=10
MailSendRetries=10
MailAllowedPeers=172.16.0.10