Telepro HEIM-48, Руководство по установке и эксплуатации

Страница: 6 / 14

Page : 6 / 14
2.1. D
EVİCE
S
TATUS
D
ISPLAYS
POWER ;
- Blinks If the device is powered and no configuration inside it,
- Solid If the device is powered and is configured,
- OFF If the device is not powred.
FAULT;
- ON If there is an internal fault in the device (Fault LED is ON If no configuration is
loaded inside it )
2.2. C
OMMUNICATION
D
ISPLAYS
RS-485 LED’s; They indicate If the communication with the Operator PC or the system connected
(HEEP-3000 RTU, SCADA etc) is normal or not.
Rx; Data reception, Tx; Data transmission
2.3. I
NPUT
D
ISPLAYS
With the help of 48 pcs of LEDs, it is easy to get information related with input signals to the HEIM-48 device from the
field.In case of any ON signal to a channel,LED corresponding to the channel is to be ON.If signal is OFF, the LED goes
OFF.
Inputs and LED Displays are divided into groups of 8pcs named as A,B,C,D,E,F.