Speaker Volume Control
You can adjust the speaker volume for a more comfortable listening level by sliding the
switch.
This will also adjust the volume of the voice driven features as well as speakerphone levels when speaker button
activated. It is suggested to maintain the volume at medium level
.
Redial
Note: To redial the last number called.
1. Lift the handset or press
SPEAKER
button.
2. Press the
REDIAL
button.
Noted: The last number dialed (up to 32 digits long) can be redialed.
Pause
You can insert a 3.6 seconds which will create a pause into dialing or storing a number into memory in
order to access custom services and possible short delays in getting dial tone.
Press
REDIAL
button at the desired point in number. Press
REDIAL
button again if an additional 3.6
seconds is needed.
Hold
To place a call on hold, press
HOLD
button. The hold indicator will light. To return to the call, press the
SPEAKER
button (or lift the handset), the
HOLD
LED goes off.
Flash
Many special network services, such as Call Waiting, require a switch hook signal. The
FLASH
button
provides the electronic equivalent of a switch hook operation.
For example, if you subscribe to Call Waiting*, you can use this feature to answer another call on the
same line by simply pressing the
FLASH
button on the unit. Press the
FLASH
button to return to the
first call.
• Please note that a subscription may be required to use these services.
Hearing Aid Compatibility
Thi
s unit is compatible with inductively coupled hearing aids.
SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR UNIT
Notes: Your unit has many VOICE PROMPTS to assist you
Symbols you should know:
OK BUTTON
Is also used for
CALL BACK
MENU
BUTTON Is also used for
EDIT
CLIP BUTTON
is also used for
EXIT
The following features are shown on the LCD display as well as Voice Prompts can be heard
Setting the LCD contrast
Setting the Time and Date
Store # to Phone Book
Name Recording for Phone Book
Record Emergency Message
Check Emergency Message
Settings for Tone /Pulse operation- preset to tone
Setting the Ringer Tone (Select the sound that fits you best)
Setting the language (English or Spanish) -
preset to English
Setting the Voice ON/OFF (
preset to Voice ON
)
Lets get started:
Slide Speaker Volume (located on side of unit) to mid-position to hear the voice prompts
Important: In setting the following criteria, if there is a delay in programming a specific feature of more
than 60 seconds, your unit will reset. In that event please re-enter the section you are entering.
10
Содержание ClearVoice 100 B
Страница 24: ......