Telematrix SIP Phone Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 55

Telematrix SIP Phone Скачать руководство пользователя страница 34

[email protected]

Page 34

www.telematrix.net

4. The items above will all be different on each phone. The items below will probably be
constant. If they are not, that may necessitate more than one configuration template. If that is
so, please make it clear.
5. What are the gateway address and DNS addresses? These might be handled by DHCP?

6. What is the SIP Registrar address and port? Is there a SIP Proxy? (unlikely)
7. Is the phone on a tagged VLAN? If so, what is the VLAN ID and priority? What should the
DSCP setting be for voice packets?

8. What is the address of the TFTP server in the system? Using the TFTP server on the Mitel
3300ICP is a known, working and available way to go if installing on a Mitel controller.
9. What dial termination rules are appropriate? Something like this is probably needed:
Item1 rule         :0
Item2 rule         :[1-8]xxx
Item3 rule         :911
Item4 rule         :9911
Item5 rule         :91xxxxxxxxxx

10. What should the MWI number be set to?
11. What should the 10 softkeys be set to?
Once these things are known, a template can be produced and reproduced for each phone.
They are then loaded onto the phone via the process below.

The Mass Configuration Utility is available for TeleMatrix partners, as a tool to facilitate building
their own multiple config files. If you have a mass configuration subscription agreement on file
with TeleMatrix, you may send your template to

[email protected]

and have the

files built for you.

IMPORTANT: When manually creating any new configuration file, the file version (top line

of config file) must be incremented.

Example: <<VOIP CONFIG FILE>>Version:2.0003

must become

<<VOIP CONFIG FILE>>Version:2.0004

«
...
32
33
34
35
36
...
»

Содержание SIP Phone
























































Отзывы:

Нет отзывов