Telematrix SIP Phone, Руководство администратора, Страница: 14 / 55

sipsupport@telematrix.net Page 14 www.telematrix.net
Telematrix SIP Phone Setup Notes
Login into either type of set using a browser to enter the web administration user interface (UI). The best
process is to configure a single phone to register and have the features desired working successfully, and
then save that phone’s configuration file as a “template” to be used for creating more configuration files.
Telematrix has developed a Mass Configuration Utility that will allow installers to take a template and
substitute values for as many phones/config files as necessary.
Start the process by plugging the 9600IP into a POE switch and obtaining the phone’s IP address using
the key sequence
* *
4(I) 7(P) # …you will hear an audible readout of the IP address.
Access SIP Configuration Settings by browsing to VOIP -> SIP Config:
SIP Configuration entry of account settings and server settings
•
Account Name: This should be the number as programmed in the 3300 ICP followed by the IP
address of the 3300 ICP. In this example, the extension is 29015 and the ICPs IP address is
192.168.101.11.
•
Password: This is the password as programmed into the 3300 ICP for the device.
•
Phone Number: This is the number that will show on a Caller ID.
•
Display Name: This is the name that will show on a Caller ID.
•
Check on Enable Register, you can see the Register Status
•
Server Address: Enter the address of the 3300 ICP followed by the port as configured on the
3300 ICP (default is 5060).