Telematrix SIP 9600IP, Руководство пользователя, Страница: 9 / 43

9
to hold the #1 handset then pick up the #2 handset.
2.2.4 Register handset
Under On-Hook status, pressing the “ Locate ” key on the base unit for three
seconds to enable the handset register mode, and the Charge indicator light flashes
at the same time ;then press
“ * ” key for three seconds to enable the handset
register mode, then ON/OFF indicator light on the handset ,and will give the prompt
tone for successful registration.
2.2.5 Delete handset
Keep pressing the “ FLASH ” key on the base unit for three seconds, the Speaker
will give “ beep ” sound, then
Press “ 0 ” on the base unit to delete all the handset.
Press “ 1 ” on the base unit to delete the first handset.
Press “ 2 ” on the base unit to delete the second handset.
Press “ 3 ” on the base unit to delete the third handset.
Press “ 4 ” on the base unit to delete the fourth handset.
After pressed the number keys, Charge indicator light will flashes, which means
the handset is being deleted by the phone. When Charge indicator light stops
flashing, it means that the deletion is finished.
2.2.6 Call--forward
The “ Enable Call Transfer ” in the “ Call Service Setting ” should be in chosen
mode (the default one is chosen mode). Suppose the user of 9600IP is user A, and
user B called user A through VoIP
，
during the communication, user B want to make
a call to user C, then user A should press FWD, after that user B can call user C
through dialing numbers.
2.2.7 Three way conference call
2.2.7.1 Three way conference call of the handset
1) Choosing the “ Enable Three Way Call ” of “ Call Service Setting ” (the default
option status of the phone), suppose the user of the 9600IP phone is A, and if user
B calls user A through VoIP phone, user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“ * ” , then
can make 3-way conference call.
2) Choosing the “ Enable Three Way Call ” of “ Call Service Setting ” (the default
option status of the phone), suppose the user of the 9600IP phone is A, and if user
B calls user A through VoIP phone, user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“ Conf ” ,
then can make 3-way conference call.
2.2.7.2 Three way conference call of the base unit
Choosing the “ Enable Three Way Call ” of “ Call Service Setting ” (the default
option status of the phone), suppose the user of the 9600IP phone is A, and if user
B calls user A through VoIP phone , user B needs to make 3-way conference call with
user A and C, then user A can use the second line to call user C, the call
auto-maintain with user B, during the conversation with C, pressing down
“ * ” can