Telematrix SIP 9600IP, Руководство пользователя

Страница: 15 / 43

15
---- PPPoE server : Enter “ ANY ” if no specified from your ITSP.
----Enter PPPoE username and password in the username and password .
9600IP will automatically obtain WAN port network information from your ITSP
if PPPoE setting and the setup are correct.
Notice : If user accesses the IP phone through WAN port. He/She should use
the new IP address to access the IP phone when the WAN port address was
changed.
3.3.2 LAN Config
LAN IP /Netmask: Set the IP and Netmask for the LAN
DHCP Server: Enable DHCP service in LAN port; after user changed LAN IP,
phone will automatically modify DHCP Lease Table and save the configure
according to IP and Netmask, DHCP server configure won
’ t take effect unless you
reboot the device.
NAT: Enable NAT.
Bridge Mode: Enable this option to switch to bridge mode. IP phone won ’ t
assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the
same network. (This setting won
’ t take effect unless you save the config and reboot
the device)
3.4 VoIP
3.4.1 SIP Config
Setting page of public SIP server: