-29-
Fig.24
PID mapping
Click “add” button in the bottom of this page, a new column of PID parameter setting will display, as
shown below:
Input TS index:
choose the input TS channel from 1 to 8.
Input PID:
select the PID, which is needed to map.
Output TS index:
choose the output channel from 1 to 4.
Output PID:
set a PID number from the input PID.
Switch:
switch on, the selected PID will map to selected channel.
After the configuration, click “Submit” button at right-bottom of the page to save the setting.
【
Remark
】
:
1. The range of input TS index is from 1 to 250, when the input TS index is out of the boundary, the
operation will failure.
2. The range of input TS index is from 1 to 16, when the output TS index is out of the boundary, the
operation will failure.
3. The input/output PIDs are decimal number
