background image

7. SYSTEM menu 

Press the SYSTEM button on the remote control or the MENU button on the TV to select the SYSTEM menu. 

You may press the SYSTEM button continuously or P+/P- button up/down to choose each item. The chosen item 

pointed by an arrow will now be red

the other items are all green . If your TV can receive only one system

the 

SOUND-SYS” will not display in menu. If your local programs are multi-system, and some a program's colour is 

not good enough, you can display this program, then select the item

COLOR-SYS

, press V+/V- button, it will 

change according to the sequence of AUTO

PAL

N3.58

N4.43

SECAM, select the best color system for this 

program. If the sound of the program is not good, you can display this program, then select the item 

SOUND-SYS”, press V+/V- button, it will change according to B/G

D/K

I, select the best sound system for 

this program. If some program is not good enough because of the weak signal, you can select the item

CORING

press V+/V- button to turn it on, this will enhance the picture. If you do nothing beyond 10 seconds, the TV will 

exit automatically from the SYSTEM menu. 

Australian System is PAL BG 

The display of SYSTEM menu is as follows

 

 

 
 
 
 
 
                                       

 
 

 

        NOTE: The color and sound systems of this TV are determined by the specifications of the TV. For                       

             example, if the TV only can receive PAL B/G system at RF;    PAL: N3.58, N4.43 at AV, its   

             color systems will be the PAL: N3.58, N4.43 and its sound system is only the B/G and 

                          the OSD of the 

SOUND-SYS” (B/G) etc. will not appear.   

                Press “SYSTEM” button on remote control to display the “SYSTEM” menu, and then press P+/P- button   

to choose “CALENDAR” item, and press V+/V- button to select calendar.   

   

      Press P+/P

button on remote control to adjust the year; press V+/V

button on remote control to adjust 

the month, after every value has been accomplished, which will be stored into EEPROM. You can press the 
“SYSTEM” button to exit “CALENDAR”. 

   
                                   2002   09  
                     
                                                SU    MO    TU    WE    TH    FR    SA 
                                                  1      2          3      4        5      6        7     
                                                  8      9        10    11        12    13      14 
                                                  15    16      17    18        19    20      21 
                                                  22    23      24    25        26    27      28 
                                                  29    30 

 
        SYSTEM 

 

        COLOR-SYS                                  AUTO 

SOUND-SYS                 B/G 
LANGUAGE                 ENG 

        CORING                                          ON 
    CALENDAR 
 

 
        SYSTEM 

 

        COLOR-SYS                                  AUTO 

SOUND-SYS                 B/G 
LANGUAGE                 ENG 

        CORING                                          ON 
    CALENDAR 

Содержание TTV-149












Отзывы: