Telefunken TF-LED28S18, Инструкция по эксплуатации

Страница: 12 / 32

Operation
12
12
Operation
Brightness, Contrast. To exit video playback
press EXIT button.
• Image file playback: Select Photo Show
item and press OK button. Press cursor but-
tons to select a file and press OK button to
start playback. During playback press MENU
button to show playback menu in which you
can select an operation by LEFT/RIGHT cursor
buttons and perform this operation by pressing
OK button. The operations include Play/Pause,
Prev., Next, Stop, Rotate Right, Rotate Left,
Music(on/off), Musiclist, Zoom in, Zoom out,
Repeat Mode, Capture and Info. To exit photo
playback press EXIT button.
If you want to capture a picture as start-
up, select the Capture icon, press OK button,
then select the Logo in Startup setting page of
OSD menu and press OK button.
• Audio file playback: Select Music show
item and press OK button. Press cursor buttons
to select a file and press OK button to start play-
back. During playback press MENU button to
show playback menu in which you can select an
operation by LEFT/RIGHT cursor buttons and
perform this operation by pressing OK button.
The operations include Play/Pause,Backward,
Forward, Prev., Next, Stop, Repeat Mode, Mute,
Playlist, Info. and Goto Time. To exit music
playback press EXIT button.
• Auto playback: Select
Auto play
item and
press OK button. Music and photo files will
be played automatically. This function is only
available if audio and image files are stored in
the same root foled of the USB.
Causes of interference
Incorporated in your TV receiver are
the most up-to-date devices to eliminate
interference. Local radiation however, can
create disturbances, which visibly affect your
picture. Proper installations, a good aerial
are your best safeguards against these
disturbances.
• RF INTERFERENCE: Moving ripples
across the screen are caused by nearby
transmitting or receiving short-wave radio
equipment.
• DIATHERMY: Herringbone pattern
and partial picture loss can result from the
operation of diathermy equipment from a
nearby doctor’s surgery or hospital.
• SNOW: Weak TV signals from long
distant stations result in an instead picture
and give the effect of falling snow. An antenna
adjustment or antenna amplifier may be
needed.
• GHOST: Multiple image, caused by
TV signals reflected back from surrounding
buildings, hills, aircraft, etc. is minimized by
correct aerial positioning.
• CAR IGNITION: Nearby cars and electrical
motors can cause small streaks across the
picture or make the picture roll.