All MV-3 controls are assembled to give a “PULL” ac-
tion on the cable. If cable action is incorrect, reverse
throttle arm by removing Hex Head Screw and large
fl at washer. Remove arm and reas semble in opposite
position as shown in Figure 5. Also, reverse position of
dwell block and spring by removing screw, fl at washer
and nut. Reassemble in opposite position (see Figure
5).
CAUTION
!
IF THE SHIFT ARM IS
REPOSITIONED, THE NEUTRAL
SAFETY SWITCH MUST ALSO
BE REPOSITIONED OR THE
SWITCH WILL BE DAMAGED.
(SEE FIGURE 4.)
Reversing Throttle Action
CONTROLS
