If the transmission shift function is different than the con-
trol shift arm, reposition the arm by remov ing hex head
screw and rotate the shift arm 180 degrees.
Pay attention to the 2-hole pattern on the shift arm for
mounting pivot. See Figure 3.
Repositioning Shift Arm
Control Confi guration
TO DETERMINE THE CORRECT
C O N T R O L A S S E M B LY F OR
INBOARDS WITH HYDRAULIC
TRANSMISIONS, YOU MUST DE-
TERMINE IF THE SHIFT CABLE
“PULLS” OR “PUSHES” TO GO
INTO FORWARD AND IF THE
THROTTLE CABLE “PULLS”
OR “PUSHES” TO OPEN THE
THROTTLE.
NOTICE
