User’s
Manual
40
5.2.2.1
Log in / Log off
You can log in using the <Admin> or <User> account. <Admin> account can
perform unit configuration freely, while <User> account has more limitation on
remote access to the unit.
One “Admin” and up to four “Users” can access a DVR series unit at the
same time. Furthermore, if the “Admin” account is currently accessing the
unit’s OSD setup menu via front panel of the unit, then you cannot save
information as an “Admin” on the remote monitoring software. The Admin
account of the DVR series unit has priority.
The following steps demonstrate procedures to view video from remote unit:
•
Start the remote monitoring software by entering the IP Address of the
DVR series unit in the Address bar of the browser. Or you may click on the
Favorite entry for the unit (if the IP address of the unit has been set).
•
Enter your Username and password. You can save password in the list if
needed. The default usernames and passwords are listed as below.
Login Type
Default User name
Admin User
Default Password
1234 4321
•
Click <OK> to log in to the DVR series unit. The process may take a few
seconds.
•
If the connection is made successfully, the main window will display live
video of the attached cameras.
If you close the IE browser, you log off the system at the same time.
