Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 37
System Configuration and Installation
Step 8:
Enter your
VRB’s
IP address and port (default is
1024
), and your network’s subnet
mask to
IP, Port and Subnet Mask
fields at
Transmitter’s IP
group respectively.
Note that the transmitter’s IP address must be the same subnet as that of the router
(please refer to your router setup menu to configure the router. For example, if your
router’s IP is 192.168.0.1, then the transmitter’s IP can become 192.168.0.2 with
subnet mask 255.255.255.0).
Step 9:
Configure the
Registration Checking
and
Video
Mode
settings.
Step 10:
You can
Enable
the Built-in Web Server so that you can see video through web
browser.
Step 11:
In the
Gateway
page, enter your router IP address (please refer to your router
setup menu to configure the router).
192.168.0__.2__
