TeleEye DT-103D, Руководство по установке

Страница: 14 / 25

Tele
Eye
Dialup CCTV
I
nstallation Guide Page 11
Installation of
Tele
Eye Dialup CCTV
4. After power up, the blue PWR LED will blink 6 times and then remains on indicates
system boot up.
5.
Now the DT-103P is ready for dialing. See section G for access the
Tele
Eye
Dialup CCTV
for video monitoring.
ISDN Version : DT-103D
Tele
Eye Dialup CCTV
ISDN version, DT-103D is used to transmit video and audio
over the Integrated Service Digital Network (ISDN). For transmitting data over the ISDN
network, an ISDN TA (or ISDN modem) is required for setting up the connection.
DT-103D have a built-in ISDN TA so that you just need to use a 4-wire telephone line to
connect DT-103D to the ISDN network directly. The built-in ISDN TA support 1B+D
channels which is capable of transmitting data at a rate of 64kbps. The line interface for
the built-in ISDN TA is S/T interface, and the default B-channel protocol is V.120.
What you need:
- DT-103D transmitter
- 4-wire telephone wire
- Power adapter
Procedures:
1.
Connect the RJ-45 side of the 4-wire telephone cable to DT-103D .
2.
Connect RJ-11 side of the 4-wire telephone cable to telephone socket from the
telephone company.
3.
Power on DT-103D by insert the power jack.
PWR LED blinks 6 times and then
remains on. Now the
DT-103P is
ready for dialing in