TeleEye DM587, Руководство пользователя

Страница: 9 / 26

8
Chapter Two Wiring and Setup of Dome System
I. Wiring of Dome System
1.Basic system connection.
（
One dome device
）
From the basic system connection, user can understand the electric wiring attribute of the dome device
and bring great operation convenience of installation, testing and demo. When using this product for
the first time, please read carefully and follow this electric wiring drawing as any wrong wiring may lead
to permanent damage of the dome device or damage of other equipment.
In the drawing, JMP-120R is the impedance matching selection of control signal and noise restrain of
RS-485, when there is long distance transmission or noise-control, it can short jumper
!Attention: No operation when the dome device is power on.
2. Multi-dome device connection.
When connecting many dome devices together, the user can embed multi-device system with
auxiliaries such as arrester device, video matrix, DVR and alarm box for system integration.
AC24V : Power supply of dome device, which will convert 110V/60H
Z
or 220V/50H
Z
input to AC 24V
output and supply to the dome device.
RS-485 Bus : It is for the control signal
（
RS-485 signal
）
output of controller, connecting to the
communication input terminals of control cable of each dome device.
Video : It is for image signal output of dome device, (can directly output to video equipment such as
monitor or video matrix. Take care of the match up of impedance.
）
接大地
/
试机时可不接
GND/No need when testing
Connecting cable
Video+
G
N
D
/N
o
n
e
e
d
w
h
e
n
te
st
in
g
Socket of
dome device
Video-
AC24V (Red)
AC24V
(Black)
Control (orange)
Control signal-
(yellow)
Image
displayer
Dome device
controller
Power
of
dome
device
Power of
keyboard