Teledyne TIENet 360 LaserFlow Ex, Инструкция по установке и эксплуатации

Страница: 84 / 140

TIENet™ 360 LaserFlow™ Velocity Sensor
Section 4 Setup with 2160 LaserFlow Module
4-14
Table 4-1 Default Advanced Settings
LaserFlow Hardware Revisions
A2 C2 C6 X0
Input Velocity Coefficients:
A: 0.0 0.0 0.0 0.0
B: 0.9 0.9 0.9 0.9
C: 0.0 0.0 0.0 0.0
Spectral Averages: 5,000 5,000 5,000 5,000
Re-home Count: 100 100 100 100
Start Bin: 15 7 7 7
Stop Bin: 1,020 1,020 1,020 1,020
Max Focus Depth: 0.1524 m 0.1524 m 0.1524 m 0.1524 m
Min Doppler Power: 1,000 1,000 1,000 1,000
Focus Learning Algorithm
Peak Detect Un-checked Un-checked Un-checked Un-checked
Adaptive Focus Un-checked Un-checked Un-checked Un-checked
Remote Distance Measurement
US Distance to Bottom N/A N/A 0.0 m 0.29765 m note 1
LaserFlow Distance to Bottom N/A N/A 0.0 m 0.0 m
Horizontal Mount N/A N/A Un-checked Un-checked
LaserFlow Directional Velocity
Focus Downstream Un-checked Un-checked Un-checked Un-checked
Maximum Distance 1.2192 m 1.2192 m 1.2192 m 1.2192 m
Maximum Velocity 0.3048 m/s 0.3048 m/s 0.3048 m/s 0.3048 m/s
Steep Slope LaserFlow Focusing
Enable Slope Setting Un-checked Un-checked Un-checked Un-checked
Parallel to Channel Slope Checked Checked Checked Checked
Slope Percentage Un-checked Un-checked Un-checked Un-checked
Optical Clarity
Active Checked Checked Checked Checked
Passive Un-checked Un-checked Un-checked Un-checked
Note 1-If the LaserFlow Ex was used in a remote ultrasonic configuration and now will be used in the built in configuration, set the US
Distance to Bottom value to 0.29765 m and the LaserFlow Distance to Bottom to zero.