Teledyne TIENet 360 LaserFlow Ex, Инструкция по установке и эксплуатации

Страница: 58 / 140

TIENet™ 360 LaserFlow™ Velocity Sensor
Section 3 Setup with Signature® Flow Meter
3-4
3.2 Measurement Setup
From Measurement Setup (Figure 3-3), select Level Input Setup
to define the blanking distances and Velocity Input Setup to set
velocity direction and access advanced settings.
Note
Refer to the Signature user manual for information about Flow
Rate Input Setup and Volume Input Setup.
Figure 3-3 Measurement Setup: Sensor input settings
(optional 350 AV Sensor also shown)
Level Input Setup
Measurement Setup
1. Level Input Setup
2. Velocity Input Setup
3. Flow Rate Input Setup
4. Volume Input Setup
1. 360 Level
Velocity Input Setup
1. 360 Velocity
2. 350 Velocity
360 Level
LEVEL
ft
ft
Blanking Distance
Minimum:
Blanking Distance
Maximum:
0
3
360 Velocity
VELOCITY
Measure positive velocity only
1. Site Setup
2. Measurement Setup
3. Adjust
4. Equation/Trigger Setup
5. Data Storage/Push Setup
6. Sampler Setup
7. Outputs/Alarms Setup
8. Reset Totalizers
9. Reports/History Setup
1.
1.
2.
Press the “Next” button twice.
350 Velocity
VELOCITY
Advanced
Advanced
Distance from bottom of sensor to
ma
x imum e xp ected liquid le v el
D i s t a n c e f r o m b o t t o m o f
sensor to bottom of channel
Set flow rate to zero if no velocity data
Measure positive velocity only
Set flow rate to zero if no velocity data