Teledyne Spyder3 SC-34-02K80-00-R, Руководство пользователя

Страница: 58 / 78

58 Spyder3 SC-34 Color Camera User's Manual
03-032-20116-01 Teledyne DALSA
Mnemonic Syntax Parameters Description
set vid eo m od e svm
i
Sw itch betw een norm al vid eo m od e and cam era test p atterns:
0
: N orm al vid eo m od e
1
: Cam era test p attern
2
: Cam era test p attern
Up d ate color
reference u cr Set the color reference valu e to the cu rrent color gain valu e .
verify tem p eratu re vt Check the internal tem p eratu re of the cam era .
verify voltage vv
Check the camera‘s input voltages and return OK or fail.
w rite FPN
coefficients w fc Write all cu rrent FPN coefficients to non -volatile m em ory.
w rite PRN U coeffs w p c Write all cu rrent PRN U coefficients to non -volatile m em ory.
w rite u ser settings w u s Write all of the u ser settings to non -volatile m em ory.
3.20 Error Handling
The follow ing table lists w arning and error m essages and p rovid es a d escrip tion and p ossible cau se.
Warning m essages are retu rned w hen the cam era cannot m eet the fu ll valu e of the requ est; error
m essages are retu rned w hen the cam era is u nable to com p lete the requ est.
Table 16: Warning and Error Messages
Message Description
OK> SUCCESS
Warning 01: Ou tsid e of sp ecification> Param eter accep ted w as ou tsid e of sp ecified op erating range (e.g. gain greater
than 0 to +20 d B of factory setting).
Warning 02: Clip p ed to m in> Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see valu e
u sed .
Warning 03: Clip p ed to m ax> Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see valu e
u sed .
Warning 04: Related p aram eters
ad ju sted > Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see valu e
u sed .
Warning 07: Coefficient m ay be
inaccu rate A/ D clip p ing has
occu rred > In the region of interest (ROI) greater than 6.251% single or 1% of averaged
p ixel valu es w ere zero or satu rated .
Warning 08: Greater than 1% of
coefficients have been clip p ed > A FPN / PRN U has been calcu lated to be greater than the m axim u m allow able
511 (8).
Warning 09: Internal line rate
inconsistent w ith read ou t tim e> Line rate inconsistent w ith read ou t tim e.
Message Description
Error 02: Unrecognized com m and > Com m and is not available in the cu rrent access level or it is not a valid
com m and .
Error 03: Incorrect nu m ber of
p aram eters> Unsu p p orted nu m ber of p aram eters entered .