Teledyne Princeton Instruments Nano-XF, Системное руководство

Страница: 2 / 56

No part of this publication may be reproduced by any means without the written permission of Teledyne Princeton Instruments.
Printed in the United States of America.
Camera Link is a registered trademark of the Automated Imaging Association.
FireWire is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries.
LEMO is a registered trademark of INTERLEMO HOLDING SA.
MegaPlus is a registered trademark of Redlake MASD, LLC.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
National Instruments, NI, and NI-IMAQ are registered trademarks of National Instruments Corporation. Other names, logos, icons, and
marks identifying National Instruments products and services referenced herein, including all marks preceded by "NI," are either
trademarks or registered trademarks of National Instruments Corporation.
Pentium is a registered trademark of Intel Corporation.
XCAP is a trademark and PIXCI is a registered trademark of EPIX, Incorporated
The information in this publication is believed to be accurate as of the publication release date. However, Teledyne Princeton
Instruments does not assume any responsibility for any consequences including any damages resulting from the use thereof. The
information contained herein is subject to change without notice. Revision of this publication may be issued to incorporate such
change.

Copyright 2009-2019
All Rights Reserved
Teledyne Princeton Instruments
3660 Quakerbridge Rd
Trenton, NJ 08619
TEL: 800-874-9789 / 609-587-9797
2 Nano-XF System Manual Issue 5
Revision History
Issue Date List of Changes
Issue 5 October 4, 2019 Issue 5 of this document incorporates the following changes:
• Rebranded as Teledyne Princeton Instruments;
• Converted to standard FrameMaker template.
Issue 4 April 20, 2016 Issue 4 of this document incorporates the following changes:
• Removed the Declaration of Conformity.
Issue 3 November 18, 2015 Issue 3 of this document incorporates the following changes:
• Updated the Declaration of Conformity.
Issue 2 August 15, 2013 Issue 2 of this document incorporates the following changes:
• Updated the Declaration of Conformity;
• Updated Warranty Information with shutter warranty information;
• Updated Contact Information.
Issue 1.A January 7, 2009 This is the initial release of this document.