5.5
Performing a factory reset
If you have forgotten the camera password, you need to perform a factory reset. A reset
can also be performed if the camera is not working as expected, for example due to per-
sistent connection problems. After the factory reset, you need to set up the connection
again between your camera and your mobile device.
Follow this procedure:
1. Turn off the FLIR ONE Edge camera.
2. Make sure the USB cable is disconnected.
3. Press and hold the On/Off button until the LEDs show a steady light.
4. The camera will now restart after the factory reset.
#T810603; r. AC/88067/88067; en-US
7
