5.1
General information
• When the FLIR ONE Edge camera is connected to your mobile device, it may have
impact on the signal strength, compass accuracy, and NFC signaling distance of the
device.
• When the FLIR ONE app is paired with the FLIR ONE Edge camera, the mobile de-
vice can only connect to the internet via mobile data (not via Wi-Fi).
• If you chose not to physically attach the FLIR ONE Edge camera to your mobile de-
vice, the FLIR ONE app will let you know when the distance between the camera and
the device becomes too long. If you then continue increasing the distance, you may
loose the connection.
• If you forget the password for connecting to the Wi-Fi of the FLIR ONE Edge camera,
you need to perform a factory reset of the camera.
5.2
Charging the battery
1. Connect a power supply to a wall outlet.
2. Connect the power supply to the USB-C charging port of the FLIR ONE Edge
camera.
3. The LEDs on the front of the camera will flash during charging, and then change into
a steady light when fully charged.
5.3
Turning the camera on and off
• To turn on the FLIR ONE Edge camera, press and hold the On/Off button until the
LEDs start flashing, indicating that the camera is booting up. It takes about 20 sec-
onds for the camera to start.
• To turn off the FLIR ONE Edge camera, press and hold the On/Off button until the
LEDs turn off.
Note
If the communication between the FLIR ONE Edge camera and the FLIR ONE
app is inactive for more than 7 minutes, the camera automatically turns off.
5.4
Connecting the camera
1. Place the FLIR ONE Edge camera close to your mobile device.
2. Make sure the camera is turned on.
3. Start the FLIR ONE app on your mobile device.
4. The FLIR ONE app will guide you to set up the app according to your preferences
and to connect (pair) the camera with your mobile device.
#T810603; r. AC/88067/88067; en-US
6
