7
Figure 10
Securing Cable to Rotor
The cable is pre-cut to the proper length and does not need to be trimmed
when properly installed.
10
Rotate the Z-drive rotor back and forth to ensure that the Z-drive moves up
and down freely.
Never push the Z-axis slider to move it up or down. Pushing on the Z-axis slider can
kink the drive cable. Instead, rotate the Z-drive rotor on the back of the
autosampler.
Figure 11
Z-Drive Rotor
If the rotor does not rotate freely, STOP and determine which part is sticking
(see the
Operator’s Manual
).
CAUTION
Rotate to Move the
Z-Drive
Z-Axis Slider
