Teledyne ADFM Hot Tap Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 116

Teledyne ADFM Hot Tap Скачать руководство пользователя страница 21

2-1



ADFM® Flow Meter

Section 2 Setup and Installation

This section of the manual contains information and instructions
for configuration, testing, installation, and deployment of the
ADFM Velocity Profiler. Included in this section are:

• Software

• Power options

• Final preparations for use

• Connecting the components

• Installation and deployment

• Built-in tests (BITs)

Use this guide to plan your installation layout. Teledyne Isco rec-
ommends distributing this information to your organization’s
planners and installation engineers.

2.1 Software

For accurate flow measurement, you will use either Flowlink®
software (optional) or WinADFM software (standard) to program
the ADFM with site-specific parameters for the pipe or channel
in which it is installed.

While both software programs are capable of basic site setup and
data retrieval, Flowlink software has expanded capabilities and
features. Contact the factory for more information.

If you have purchased

Flowlink

software, refer to Section 2.2 for

basic setup and Section 2.13 for basic data retrieval and viewing.

If you are using

WinADFM

software, refer to Section 2.3 for

basic setup and Section 2.14 for basic data retrieval and viewing.

2.2 Flowlink Software

For complete information about setup and operation of Flowlink
software, refer to the Flowlink user manual and Help files.

1. Connect the computer to the ADFM flow meter with the

communication interface cable.

2. Click the Quick Connect button on the Flowlink toolbar, or

press F11 on the keyboard. Flowlink opens the Quick Con-
nect window.

3. Select the Type of connection (Direct for initial setup).

4. Check the Create new site check box and then click on the

large button for pulse doppler instruments.

5. The Pulse Doppler Connect window will appear.

6. Enter a site name and a device name, and select the radio

button for ADFM.



«
...
19
20
21
22
23
...
»

Содержание ADFM Hot Tap





















































































































Отзывы:

Нет отзывов